• OpUtils : Under Inventory, Actions column with scan and delete option is made available which makes it easier to do these functions.
  • OpUtils : Under Inventory, approving of subnets can be done in a few clicks now by selecting the ‘Approve’ option found in discovered subnets.
  • OpUtils : Previously under Inventory, ‘Approve Subnets’ tab didn’t display the subnet address and mask values of a selected subnet. The issue is fixed now.
  • OpUtils : Under Inventory, ‘Added Time’ column is added and many other irrelavant columns are removed from the discovered subnets of IPAM.
  • OpUtils : Under Inventory, an appropriate message is now displayed when bulk subnets are selected for approval.
  • NCM: “Grid view” option has been introduced in the Device Group page. Now, users can switch between “Grid View” and “Widget View” as per their need.
  • NCM: Look and feel for info messages in all the forms have been changed.
  • NCM: All the reports can be generated in both Widget and Grid View for device groups directly from the Device Group page.
  • NCM: Tasks can be scheduled for all the device groups directly from Device Group page.
  • NCM: Users can now run compliance check and associate groups to compliance policies directly from Device Group page.
  • OpManager: Under Server dashboard, two new types of Heat maps have been introduced to represent all file and folder monitors associated to the respected devices in OpManager.
  • OpManager: New default reports have been introduced for VM Sprawl data under Virtual server reports.
  • OpManager: 34 new monitors for disk, memory and processor have been added in addition to the existing WMI monitors.
  • OpManager: In VMware/ESX discovery, VMware datastore of type ‘VSAN’ were not discovered. ‘VSAN’ support has now been included.
  • OpManager: If VMware ESX had either a ‘HostPortGroup’ or a ‘HostVirtualSwitch’ with the same name (case insensitive), there were issues with vCenter/ESX server discovery. This has now been fixed.
  • OpManager: When an unmonitored ESX host under vCenter is monitored by mapping from the vCenter snapshot page, hardware monitor for that ESX Server was not initiated even when it was enabled. This issue has now been fixed.
  • OpManager: During HyperV server discovery, some HyperV server entities were not discovered in certain cases. This issue has been fixed.
  • OpManager: When a large number of VMware events were raised, they were not reflected in the monitored vCenter/ESX servers. This issue has been fixed.
  • OpManager: During multiple XenServer or server pool discovery, storage repositories and networks were discovered only for one pool. This issue has been fixed.
  • OpManager: Under Discovery, when multiple credentials were selected, the device was discovered under ‘unknown’ category. This issue has been fixed.
  • OpManager: Previously, in SNMPv3 discovery, engineID was duplicated for different devices. This has been fixed and now if engineID matches with engineID of already added device, then the device will be added as Non-SNMP Device.
  • OpManager: Rebooting the device caused SNMPv3 data collection to stop. This issue has been fixed.
  • OpManager: Previously, Test credentials displayed status as ‘Pass’ even when the credentials were wrong. This has been fixed now.
  • OpManager: No proper error message was displayed when MIB browser was not working with SNMPv3 credentials. This has now been fixed.
  • OpManager: The flash Business view was not accessible by the operator user. This issue has been fixed.
  • OpManager: The link generated using ‘Embed widget’ was not working for Rack view, 3D Floor view and Floor details widget. This issue has now been fixed.
  • OpManager: When editing custom fields in device snapshot page, the encoded characters were displayed for all other languages apart from English. This issue has now been fixed.
  • OpManager: For CLI snapshot page credentials, the prompt value for ‘Command’, ‘Login’ and ‘Password’ were displayed as an encoded character. This issue has been fixed.
  • OpManager: In Interfaces view under ‘Inventory’, the interfaces are now sorted based on ‘ifIndex’.
  • OpManager: Previously, accessing Downtime Schedules from Settings –> Configuration–> Downtime Schedules displayed a blank page. This issue has been fixed.
  • OpManager: Previously, accessing Rule Engine from Settings –> Configuration –> Rule Engine displayed a blank page. This issue has been fixed.
  • OpManager: In Maps, when refreshing the tab after selecting and saving ‘Google Maps’ as the primary option, ‘Zoho Maps’ was displayed again. This issue has been fixed.
  • OpManager: Warning messages for certain actions has been added to provide better clarity.
  • OpManager: The link status and traffic load were missing in the NOC view and Dashboard. This has been fixed.
  • OpManager: The loading time for all devices in business view has been optimized.
  • OpManager: It was not possible to generate interface graphs for a custom time period. This issue has now been fixed.
  • OpManager: The loading speed has been optimized for:
    • Device Template list page.
    • Vendor Template list page.
    • Edit Device details page.
  • OpUtils: Under Settings of Switch Port Mapper, dropdown options such as port number and interface name are given inorder to show port label text in switch snapshot page.
  • OpUtils : The Community Checker tool, which scans the range of IP Addresses to get their SNMP read and write community strings in the network, has been brought back under SNMP tools.
  • General: SQL injection vulnerabilities in unauthenticated servlets has been fixed.
  • OpUtils : Under Mac-to-IP Mapping, The XSS vulnerability issue in addRouter API has been fixed.
  • OpUtils : Under IPAM Settings, The XSS vulnerability issue in addIPAMScheduler API has been fixed.
  • NetFlow : Inventory updater feature that fetches device details on scheduled time, has been introduced.
  • NCM : Automatic Change Detection was not working. This issue has now been fixed.
  • General : SMS notifications via the SMS gateway was not working properly when the proxy settings were configured. This issue has now been fixed.
  • General : Password length of Mail Server Settings and Proxy Server Settings have been increased.
  • General : Quicklinks and info messages have been added to help the user with ‘How-To’ and ‘FAQ’ in the Notification Profile, User Management, Mail Server Settings, Proxy Settings and Rebranding pages.
  • General : When a CCTV view was deleted from the CCTV list, the Dashboard kept loading for a long time. This issue has been fixed.
  • General : In CCTV view, the seconds timer sometimes displayed a negative value. This issue has been fixed.
  • General : In some cases, there was an out of memory (OOM) issue during product startup. This has now been fixed.
  • OpManager : A message variable has been added to include Probe Name details in alerts from the Central’s Notification Profile.
  • OpManager : Unable to save Run Program Notification Profile, when Arguments length exceeded 250 chars. This issue has now been fixed.
  • OpManager : Unable to save Run System Command Notification Profile, when Command String length exceeded 250 chars. This issue has now been fixed.
  • NetFlow : WLC widgets now support SSID Group resource type.
  • NetFlow : Schedule reports have been added for Access Point Group and SSID Group.
  • NetFlow : Autonomous System details have been updated.
  • Firewall : Vendor API based Compliance-Standards report for CheckPoint devices.
  • Firewall : Export as CSV and Excel option has been provided for all Inventory and Reports drill-down pages.
  • Firewall : Delete button alignment issue in Device-Rule list page issue fixed.
  • Firewall : Fixed the ‘Grey’ color assigned to one of the Protocol-groups in the ‘Traffic Statistics’ graph which looks odd with the graph background.
  • Firewall : Some unwanted resource check has been removed in the dashboard pages to improve the page loading.
  • Firewall : ‘Delete’ option is shown as button now in Imported Logs, Device-Rule, Exclude-Criteria, Credential Profiles and Archived Files list pages.
  • Firewall : Removed the ‘Group Chat’ icon in vertical tab UI.
  • Firewall : CheckPoint log-import issue fixed for non-English OS installations.
  • OpManager : In Notifications Profile, SNMPv3 support has been provided for trap forwarding. This option can be found in the Trap Profile section.
  • OpManager: In Workflow, info messages have been added to indicate the types of scripts supported in ‘Execute Windows Script’ and ‘Execute Linux Script’, and to indicate the supported command line arguments in ‘Execute Scripts’.
  • OpManager: While creating a new workflow, each action will display a note of supported devices on which that particular action can be executed.
  • OpManager: Confirmation messages will now be displayed before redirecting to the ‘Log a Ticket (SDP) Configuration’ or ‘Mail Configuration’ pages.
  • OpManager: The ‘Traps’ heading has been changed to ‘SNMP Trap Processors’ in the Trap Processor list view page.
  • OpManager: Learn more and quick links have been provided for ‘Alarm Escalation’, ‘Workflow’ and ‘SNMP Trap Processors’.
  • OpManager: In the Alarms page, there was an alarm count mismatch issue with the total alarms displayed as a pie-chart and the alarms displayed based on the severity. This issue has been fixed.
  • OpManager: Previously, a few search filters in the Alarms page were not working properly. This issue has now been fixed.
  • OpManager: In the Inventory page, while using ‘filter by probe’ option, the page count was displayed as zero. This issue has now been fixed.
  • OpManager: “Log a ticket” task does not work when SDP or SDP-MSP is integrated after the Servlet API is upgraded to Rest API. This has been fixed now.
  • OpManager: When Execute Workflow is clicked, the workflow executes more than once. This has been fixed now.
  • General: The XSS vulnerability in alarm escalation has been fixed.
  • OpManager: Previously, it was not possible to export a PDF in Russian language. This has now been fixed.
  • OpManager: Timeout configuration is now available for SPD/SDP MSP.
  • OpManager: It is now possible to configure the ‘Availability time’ format.
  • OpManager: Option has been added to configure image position for ‘Report Header’.
  • OpManager: The message box in ‘Schedule This’ option is now customizable with additional params.
  • OpManager: Previously, it was not possible to properly identify the utilization peaks in ‘Report builder’ interface. This has now been fixed.
  • OpManager: In snapshot page, host name alias support is now provided for on click PDF.
  • OpManager: There were issues with the option to exclude days in ’Top n’ reports. This has now been fixed.
  • OpManager: The reports triggered from the ‘Notification profile’ had a few issues in other languages apart from English. This has now been fixed.
  • OpManager : Storage Monitoring : Previously, there were issues in discovery and data collection in PureStorage storage devices. This has been fixed now.
  • OpManager : Domain controller devices were not categorized as “Domain controller” when they were discovered through Network discovery. This issue has been fixed.
  • OpManager : Layer2 Discovery failed when the length of the discovered device type exceeded 50 characters. This issue has now been fixed.
  • OpManager : In Discovery, the rule engine to associate script monitor failed when the threshold was configured. This issue has now been fixed.
  • OpManager : While saving SNMP credential, it was not possible to save the credential type as “None”. This issue has been fixed.
  • OpManager : Under Discovery settings, a new option “Use DNS as DisplayName” is provided to set the DNS name as the display name after discovery.
  • OpManager : The ‘Edit Threshold’ button was hidden when importing device templates. This has been fixed.
  • OpManager : In the bulk credentials association page, there was no option to filter results based on ‘Category’ or ‘Business view’. This has been added.
  • OpManager : From the interface configuration page, when navigating to other listed pages from the first page, the selected configuration options were not updated. This issue has been fixed.
  • OpManager : In the import devices page, there was no search option. This has now been added.
  • OpManager : The discovery settings configuration page has been moved from Settings > Basic Settings > System settings to Settings > Discovery
  • OpManager : Previously, there was an issue with Lucent-Xedia and Nortel Networks’ device templates. This issue has been fixed.
  • OpManager : Previously, interface data collection stopped when bandwidth exceeded the specified value. This issue has been fixed.
  • OpManager : Previously, Bandwidth Utilization was calculated based on IFSPEED. Now, the same calculation is performed based on INSPEED and OUTSPEED.
  • OpManager : Previously, configuring an unmanaged interface caused OpManager to manage that interface. This issue has been fixed.
  • OpManager : Previously, there was a ‘?’ (Question mark character) in the device template’s Name and OID for Intel device templates. This issue has been fixed.
  • OpManager : Previously, it was not possible to view interface reports due to big values in the interface data. This issue has now been fixed.
  • OpManager : Ping failure case has been implemented for TTL (Time-to-live) expired message.
  • OpManager : In the Dashboard, same data was displayed in all the interface bandwidth widgets. This issue has now been fixed.
  • OpManager : Metrics for ’95th percentile value’ has been included along with the ’95th percentile average’ in Interface graphs.
  • OpManager : For newer versions of Windows, the type will be classified in OpManager with an entry in the XML file.
  • OpManager : In the Inventory page, bulk deletion of devices was time consuming .This issue has been fixed.
  • OpManager : The Linux FreeBSD device was not classified properly. This issue has been fixed.
  • OpManager : During scheduled discovery, the RAM and HardDisk size were not updated in the device snapshot page. This issue has been fixed.
  • OpManager : Previously, the ‘Packet Loss’ dial in snapshot page displayed the day’s average value instead of the last packet loss value. This has now been fixed.
  • OpManager : In e-mails sent using the ‘Send Email’ notification profile with the custom message variable ‘$IntfField(ipAddress)’, the device IP Address was displayed instead of the interface IP Address in the ‘Interface Details’ section of the message. This issue has been fixed.
  • OpManager : The Downtime report displayed incorrect devices for the selected interval. This has been fixed.
  • OpManager : For Business View users, the ‘Device Availability Dashboard’ report displayed devices that the user was not authorized to view. This issue has been fixed.
  • OpManager : There were a few usability issues in the Device Template page.This has now been fixed.
  • OpManager : In the Interface graph widget, there was an overlap issue with the graph.This has now been fixed.
  • OpManager : In the Discovery page, ‘Execute Now’ option has been added to instantly start discovery.
  • OpManager : Usability issues in the Discovery page have been fixed.
  • OpManager : In BusinessView, the status did not get updated when the BusinessView shortcut was placed in a circular manner. This issue has been fixed.
  • OpManager : In Maps, the satellite view button was not displayed for Google Maps. This issue has been fixed.
  • OpManager : In the Downtime Scheduler page, option to Enable/Disable schedules has now been provided.
  • OpManager : The Interface Bandwidth report has been renamed as Interface Speed Report. The columns ‘Transmit Bandwidth’ and ‘Receive Bandwidth’ have been renamed as ‘Out Speed’ and ‘In Speed’ respectively.
  • OpManager : Adding a discovery rule engine can now be done from the ‘Discovery Profile’.
  • OpManager : The following titles/labels have been renamed across the product.
    • ‘Downtime Schedules’ to ‘Device Downtime Schedules’.
    • ‘Telnet/SSH/SNMP’ in NCM to ‘Backup Credential’.
    • ‘Rule Engine’ to ‘Discovery Rule Engine’.
    • In Custom Fields, ‘Import field properties from CSV’ to ‘Import from CSV’.
    • In Discovery profile, the ‘Add filter’ button as ‘Add Discovery Filter’.
  • OpManager: The navigation for the following pages have been changed.
    • The Categories tab has been moved to ‘Configuration’ from ‘Basic settings’.
    • The IPSLA tab has been moved from ‘Configuration’ page to ‘Monitoring’ tab under Settings.
    • The ‘Monitoring Interval’ tab has been moved to ‘Quick Configuration Wizard’ page under Configuration.
  • OpManager: Under ‘Reports’, a new hardware information report to show the basic hardware information has been included for all the hardware monitoring enabled devices.
  • OpManager: A dedicated tab has been introduced for all the monitors in the device snapshot page.
  • OpManager: In the Inventory, new main level tabs have been introduced for ‘Network’, ‘Server’ and ‘Virtual’ devices for easier navigation and sorting.
  • OpManager: Previously, exchange monitors could not be saved if the path name of the storage location had ‘.’ character. This has now been fixed.
  • OpManager: When a new event rule was added with an existing rule name, the action was not restricted and actual events were not generated due to a change in Eventlog ID. This has now been fixed.
  • OpManager: Events with the Eventlog ID set as ‘0’ were not received. This issue has been fixed.
  • OpManager: Without enabling the monitoring interval for ‘Event Log’, when trying to associate event log monitors to a device in OpManager from the ‘Quick Configuration Wizard’, ‘Snapshot page’ or ‘Rule Engine’, event log monitoring for those devices were not enabled automatically. This issue has been fixed.
  • OpManager: If any new event log rule was associated to the device using ‘Rule Engine’, the event log monitoring interval for that device was set to 5 minutes by default. This has been fixed.
  • OpManager: It was not possible to reset the uplink dependency for the device once it was set to some value, even after selecting the value as ‘None’. This has been fixed.
  • NetFlow : Added options to Create, Modify, and Delete SSID groups.
  • NetFlow : In the Inventory, Snapshot reports have been added for SSID groups.
  • NetFlow : SSID groups now support Capacity planning and Consolidated reports.
  • NetFlow : An option to assign SSID Groups for Operator, and Guest users has been provided.
  • OpUtils: For other language installation, iTextAsian.jar file has to be downloaded by the user. This download message has been enhanced and is displayed clearly in OpUtils’s UI.
  • OpUtils : Under Bandwidth Monitor in Inventory, the page was redirected to ‘Add switch’ page when Edit option of ifName is clicked. This issue is fixed now.
  • OpUtils : Under Inventory, the “No records to view” message was not shown even when there is no data available. This issue is fixed now.
  • OpUtils : Under Bandwidth Monitor in Inventory, when ‘List Tools’ icon is clicked the page is redirected to device snapshot page after the tools list is shown. This issue is fixed now.
  • OpUtils : Added ‘Tray’ Icon for Windows installation to start, stop, and get status of OpUtils.
  • OpUtils : Action class has been removed as it causes vulnerabilities in the product.
  • OpUtils : The Horizontal menu in the UI is enhanced in such a way that an “Add Device” option is added to Inventory, IP address manager, switch port mapper, etc. when the mouse hovers over it.
  • OpUtils : Under Settings, the “Maintain scan result of last 7 days” option of publish function didn’t work properly. The issue is fixed now.
  • OpUtils : Under Switch Snapshot page, the custom column’s validation doesn’t work when updating the boolean and integer data type. The issue is fixed now.
  • OpManager : When functional expressions are applied to an SNMP monitor, the value of the monitor was duplicated with the other SNMP monitors. This issue has been fixed.
  • OpManager : OpManager now supports Layer2 discovery for other devices apart from routers and switches. This can be configured by making an entry in the “layer2Discovery.properties”.
  • Firewall : New device log support – VarioSecure firewall.
  • Firewall : Automatic Security Audit report generation for Check Point (R-80.10 and above) devices using API.
  • Firewall : CLI based Policy analysis, Rule management and Compliance support for pfSense firewalls.
  • Firewall : Added Line and Bar graph options for device and interface Live reports.
  • Firewall : XML External Entity Injection(XXE) vulnerability raised in report-profiles import.
  • Firewall : Cross Site Scripting Vulnerability raised in ManualDns-Mapping entry.
  • Firewall : Support-Id: 4811677 : Raw Search returned no data, if the search period is more than a month.
  • Firewall : Support ID 4909346: Fixed the Device Rule configuration failure issue, in HA mode of FortiGate with VDOM setup.
  • Firewall : Support ID 4909346: Fixed the issue of showing password in plain text, in the Device Rule submit response.
  • Firewall : Support ID 4919514: Fixed the issue of embed widget not working, in CCTV view.
  • Firewall : Support ID 4927087: New column added to display Cisco ACE hex code in Raw search results page.
  • Firewall : Support ID 4553065: Fixed Squid proxy server parsing issue.
  • Firewall : Support ID 4934078, 4950793: Fixed the issue of wrong client IP assignment for Cisco VPN.
  • Firewall : Fixed the issue of Scheduled Rule fetching failure for Check Point, due to CLI connection attempt.
  • Firewall : Huawei device change management reports are loaded with full configuration instead of changes alone. Fixed the issue.
  • Firewall : Added default exclude criteria for SonicWall devices to remove dynamic key updates as changes from Change Management Report. Fixed the issue.
  • Firewall : Policy Overview Schedule list page displayed schedule details of all the devices. Fixed the issue to display the schedule details of only selected devices.
  • Firewall : Was able to configure SNMP for Unmanaged devices. Fixed the issue.
  • Firewall : No criteria is displayed for Policy Overview Scheduled reports when report specific criteria is provided. Fixed the issue.
  • Firewall : For proxy devices Live Traffic is displayed in dashboard but not in Inventory page. Fixed the issue.
  • Firewall : In Raw Search mail content PDF Report, Criteria value had extra details other than user configured criteria. Removed those unconfigured criteria and fixed the issue.
  • Firewall : Exception thrown when Diagnose connections page is clicked in Settings tab. Fixed the issue.
  • Firewall : In Settings, under User Management – Add/Edit User – Device list page, the deleted devices are also listed. Fixed the issue.
  • Firewall : In Configuration Changes Mail Notification, Mail content has Disable link in the start of the mail. Moved the Disable link message to end of the Mail to fix the issue.
  • Firewall : Fixed the issue of custom widget addition for Live Traffic without selecting a device, by ignoring the status message.
  • Firewall : Fixed the issue of no redirection to reports page when the ‘Unknown’ user is clicked in Inventory > Users tab.
  • Firewall : Added the missing ‘Security settings’ option in Admin server.
  • Firewall : When device configuration fetching is in progress, other tabs cannot be accessed. This issue is fixed.
  • Firewall : Due to pagination, in Rule Management page the ‘Export to Excel’ option was hidden. The issue is fixed to display the option.
  • Firewall : In menu hover option, configured custom reports are displayed.
  • Firewall : New help page links provided for Syslog server, Manual DNS and Security Audit report pages.
  • Firewall : Minor UI issues are fixes.
  • NetFlow : The currency list for billing feature is updated.
  • NetFlow : Introduced an option to select multiple combinations of IP address for “From” and “To” in Between Sites IP Grouping.
  • NetFlow : Bulk load option to upload multiple unmapped applications is introduced in Application Mapping.
  • General : During API calls, there was an ‘APIKey’ exposure vulnerability. This issue has been fixed now.
  • General : There was an issue with the timezone displayed in the graph of an embedded NFA widget. This has now been fixed.
  • OpManager : Support for alarm variables as in Notification profile has been provided for ‘Send email’ task in Workflows.
  • OpManager : Previously, there was a compatibility issue with EMC VNX File devices. It has been fixed now.
  • OpManager : There were issues with adding a single RAID device under any Dell EqualLogic device. This has been fixed now.
  • OpManager : Clickjacking vulnerability in Reports has been fixed now.
  • OpManager : Previously, when OpManager was loaded with the ‘Check URL’ task in Workflows, the web client became unresponsive. This issue has been fixed now.
  • OpManager : The create new report UI has been revamped.
  • OpManager : The create new virtual server report has been revamped.
  • OpManager : The schedule reports list view has been revamped.
  • OpManager : The create schedule report UI has been revamped.
  • OpManager : An empty schedule report page has been added.
  • OpManager : The reports list UI has been revamped.
  • OpManager : Create new reports, the monitor field displayed undefined values for certain vendors. This issue has been fixed.
  • OpManager : In the OpManager mobile application, support has been added for alarms to be pushed as notifications based on the user’s role.
  • OpManager : Option to filter alarms based on the device and their severity level has been included in the mobile application.
  • OpManager : Option to ‘Acknowledge’, ‘Unacknowledge’ or ‘Clear’ alarms has been provided based on the alarm.
  • OpManager : Alarm Escalation feature has now been extended for URL Monitoring.
  • OpManager : Custom Time Period option has been added for Alarm Suppression.
  • OpManager: Usability issues in the Discovery page have been fixed.
  • OpManager: There were a few usability issues in the Rule Engine page. This has now been fixed.
  • OpManager : Previously, Devices are not listing properly in Packetloss/Response time global threshold page.This issue is fixed now.
  • OpManager : Previously, Devices Availability Dashboard Report graph time format issue occurred when a period 7 days or 30days, was selected. This issue is fixed now.
  • OpManager : The “Configure Interface” option provided for Firewall devices.
  • OpManager : ‘Disk’ and ‘RAM’ details are now hidden in Switch and Router device summary.
  • OpManager : Previously, there were issues with the associate credentials action. This has now been fixed.
  • OpManager : In Maps page, the Device count was only shown in the Business View section. This issue has now been fixed.
  • OpManager : In device snapshot page, Interface’s real time graph was not shown if there were special characters in the interface name. This issue has now been fixed.
  • OpManager : When rediscovering interfaces, rediscovery failed when the interface count exceeded 500. This issue has been fixed.
  • OpManager: Previously, subInterfaces were not being rediscovered during Rediscovery process. This issue has been fixed.
  • OpManager: While rediscovering interfaces, there was an issue with rediscovering interfaces of Fortinet devices. This has now been fixed.
  • OpManager : In Device templates, there was a problem with ‘StringtoNumeric’ dials. This issue has been fixed.
  • OpManager : The category of Eaton 9SX 5000 has been changed from Desktop to UPS.
  • OpManager: Language localisation for several values and fields is now done for Spanish, German, Korean, France and Italian languages.
  • OpManager: While adding monitors in the ‘Monitoring’ page under settings, an option has been provided to associate the monitors directly to device, without having to come back to Monitoring page again.
  • OpManager: In the ‘Monitoring’ page under settings, a link has been provided for all monitors to view the respective devices linked to that specific monitor.
  • OpManager: While adding URL Monitor, if ‘Check URL’ operation is performed, then it led to a vulnerability if user has given any concealed javascript code in the url address field. This issue has now been fixed.
  • General : Pre-populated Database has been bundled with the Windows 64Bit build.
  • OpManager : The ‘Last Polled Value’ and ‘Last Polled Time’ have been added in script monitors.
  • OpManager : The custom script template webpage can now be accessed from the OpManager UI.
  • OpManager : In the ‘Test credential’ page under device snapshot, the SSH key file update issue has now been fixed.

Need help with your update?

Receive expert assistance from set3 Solutions.

Need help? Contact us now on 01403 588 898 to talk to one of our experts, or email info@set3.co.uk.

 

On this website we use first or third-party tools that store small files (cookie) on your device. Cookies are normally used to allow the site to run properly (technical cookies), to generate navigation usage reports (statistics cookies) and to suitably advertise our services/products (profiling cookies). We can directly use technical cookies, but you have the right to choose whether or not to enable statistical and profiling cookies. Enabling these cookies, you help us to offer you a better experience.

For full details please review our Privacy policy